Sensibo vs Cielo: How Does Mysa Stack Up?

We see Sensibo vs Cielo smart thermostats compared all the time, but how does Mysa’s smart thermostat lineup compare? There’s a lot to unpack here.

First, know that Sensibo only makes IR-based controllers. They don’t replace a thermostat or wire into HVAC equipment. You’re paying anywhere from $127-$215 for a fancy remote that doesn’t give you quite the level of control you’d expect.

Cielo does make 24V smart thermostats along with its IR controller lineup. But even those thermostats don’t tell you how much energy you’re actually using. You’re left guessing whether schedule changes or temperature adjustments are saving you money or just changing comfort.

Mysa is different. Our smart thermostats replace the control at the system level and measure real energy use by room for electric heating, so you can see exact heating costs and make changes based on data. We also specialize in the systems other brands overlook, from our baseboard heater thermostat to our in floor heating thermostat. 

Learn more about Cielo vs Sensibo vs Mysa below and take control of your heating and cooling!

Sensibo vs Cielo (Quick Comparison With Mysa)

Mysa’s Smart Thermostat Lineup

Mysa makes smart thermostats that replace the control you already use instead of just adding another layer on top of it. Every product is tailored to a specific heating or cooling system, with hardware that matches the wiring, voltage, and behavior of that system. This translates to:

• Direct control
• Predictable schedules
• An app that shows what’s actually happening in every room

A Thermostat For Every System 

• Mysa for Electric Baseboards: Built for 120-240V electric baseboard and fan-forced heaters. Installs directly in the wall box, lets you schedule heat by room, adjust temperatures remotely, and see measured electricity use for each zone. A true line-voltage thermostat (not a workaround).
• Mysa for Electric In-Floor Heating: Designed for electric radiant floors and includes support for a floor sensor. Doesn’t guess based on air temperature - it regulates heat using floor temperature to avoid overheating and uneven warmth. This makes a big difference in bathrooms and large tiled spaces.
• Mysa for Mini-Split Heat Pumps: Controls ductless systems using infrared, replacing the handheld remote with app control and scheduling. It’s built specifically for mini-split behavior (including modes and fan settings) without touching system wiring.
• Mysa for Central HVAC: A 24V smart thermostat for furnaces, central air conditioners, and ducted heat pumps. You get clear scheduling, remote control, and multi-user access through the same app used by other Mysa products.

A Seamless User Experience

Adding a Mysa device to your home or business is simple. There aren’t any subscription fees to stress about, and you get a 5-year warranty to back your purchase up. You’ll also enjoy North American support to help you make the most of your investment.

Manage every heating/cooling system in your home seamlessly from a single device, with controls you can count on to behave exactly how you set them. 

Sensibo’s Smart Thermostat Lineup

Sensibo’s smart climate controllers are designed for air conditioners and heat pumps that already use a handheld remote. It’s not a true mini split thermostat - rather, it’s a “remote” that sits in the room and sends infrared commands over WiFi. 

No need to replace a wall thermostat or wire into HVAC equipment. That’s compelling, sure. But it comes at the cost of true system-level control and insight. 

The Sensibo Air Pro and Sky

The two most popular products Sensibo makes both control mini-split systems, window ACs, portable units, and other remote-controlled air conditioners/heat pumps. Power the device, connect it to Wi-Fi, and pair it with your unit by selecting the remote profile in the app. Every indoor unit needs its own Sensibo device.

Sensibo Air Pro has onboard temperature and humidity sensors, along with air-quality monitoring based on TVOC readings and CO₂ equivalents. You can set up schedules, onboard temperature and humidity sensors, along with air-quality monitoring based on TVOC readings and CO₂ equivalents. The app sends commands when you leave or return.

On the other hand, the Sensibo Sky is a more affordable way to get remote control and scheduling features without the added air-quality sensors. 

Control via the Sensibo App

Across the lineup, you’ll use the Sensibo app or supported voice assistants to control devices. You can change modes, fan speeds, set points, and swing positions, just as you would with the original remote. The big difference is the ability to make changes remotely.

But because Sensibo communicates via infrared, it doesn’t replace an existing thermostat, connect to a control board, or measure electrical energy use. Usage insights and savings claims are based on patterns and automation rules rather than direct power measurement.

That could be a dealbreaker if your main goal is to optimize energy usage in your home or business. You can learn more about Mysa vs Sensibo in our blog - but let’s take a closer look at Sensibo vs Cielo below. 

Cielo’s Smart Thermostat Lineup

Cielo is more like Mysa in the sense that you can choose from IR-based smart controllers for a mini split air conditioner or a true 24V smart thermostat for ducted HVAC systems. You have more flexibility in what you can control and how you go about it than you would with Sensibo.

Cielo Breez Controllers

These IR-based controllers are compatible with air conditioners and heat pumps that already use a handheld remote, including mini-splits, window units, and portable ACs. The device sits in the room and sends infrared commands over Wi-Fi that match the original remote’s signals.

Setup is app-guided and doesn’t require electrical work, so you can get up and running in minutes. Each indoor unit needs its own controller. From there you’ll be able to change modes, fan speeds, set points, and create schedules in the Cielo app. Automation features are available as well, such as geofencing and presence-based adjustments.

Cielo’s Smart Thermostat for 24V HVAC systems

The brand also has a wired wall thermostat designed for furnaces, boilers, central air conditioners, and ducted heat pumps. It replaces an existing low-voltage thermostat and connects directly to the HVAC control wiring.

The thermostat supports multi-stage heating and cooling, scheduling, presets, vacation mode, and optional equipment like humidifiers or dehumidifiers, depending on system wiring.

Control and Considerations for Cielo

Automation, location-based behavior, and app-driven control are all key principles across the Cielo lineup. The app grants insights into automation, location-based behavior, and app-driven control. It also supports temperatures, set points, and system activity.

Here’s an important point of distinction for this Cielo vs Sensibo comparison, though - these products don’t measure electrical energy usage at the equipment. Usage insights are derived from run activity and automation behavior rather than power draw. That means you should take them with a grain of salt. 

Sensibo vs Cielo vs Mysa: Side-by-Side Comparison

There’s a ton of overlap when you look at Sensibo vs Cielo vs Mysa - at least, on the surface. All three brands provide smarter control over heating and cooling. 

The difference is in how the problem is approached. Choosing the right smart thermostat really just comes down to what you want it to do. Here’s what you need to know about Mysa vs Cielo vs Sensibo. 

Upfront and Ongoing Cost

Let’s start with the dollars and cents. Cost will depend on the type of device you’re considering. IR-based remotes like those from Sensibo will always be more affordable than a full-fledged 24V smart thermostat. So keep that in mind. That being said:

• Sensibo Air Pro: $139
• Cielo Breez Max: $105
• Mysa For Mini Splits: $129

You’ll need a device for every room you want to control.

As for 24V wired thermostats, we have to leave Sensibo out of the comparison and just focus on Cielo and Mysa. Our Smart Thermostat for HVAC and the Cielo Smart Central Controller are actually priced almost the exact same at $129-$130.

The difference comes down to value for the money. As we’ve said already in this Sensibo vs Cielo vs Mysa comparison, you get precision insights derived from real energy usage so you can actually make informed decisions about your climate control.  

One important consideration for someone comparing Cielo vs Sensibo, though, is that a lot of the more advanced features from Sensibo - like detailed analytics, anti-mold, AC health check, etc. - are hidden behind a subscription known as “Energy Saver Plan.” It’s only $3 a month, but it’s worth keeping in mind.

Our ENERGY STAR certified device could pay for itself in the first 8-12 months of use. This goes back to how it helps you optimize your climate and avoid wasting energy. 

The Installation and Setup Phase

The setup process all depends on what type of device you go with, just like the cost varies per device. 

All of Sensibo’s smart thermostat controllers are simple to install because they’re just IR-based remotes. The average setup time is a minute. No tools needed, because you’re not replacing anything. Just scan the QR code on your Sensibo device and follow the instructions that pop up.

The process is fairly similar for Cielo and Mysa devices that operate through IR control. But, you’ll find it a bit more involved if you go with a Smart Thermostat for Central HVAC since you are replacing a real thermostat.

Even still, it takes less than half an hour with Mysa. Most customers are up and running in 15-20 minutes.  All you do is connect five color-coded wires following the in-app guide, mount the base plate, attach the faceplate, power on and complete setup. Or, you could spend $75-150 hiring a pro. But we made it a point to simplify the setup to keep costs low for you.

Operating Your Smart Thermostat

All three brands in our Mysa vs Sensibo vs Cielo comparison have their own dedicated apps for climate control no matter where you are. You never have to worry about forgetting to turn off the air when you leave home - just pull up the app.

You can also set up geofencing, which automatically detects when you leave and turns your thermostat to “away” settings to save you money. All devices in this Mysa vs Cielo vs Sensibo comparison can be controlled directly on the thermostat interface, too.

Just remember that operation depends on the device in question. Sensibo, Cielo, and Mysa’s IR products operate much like a digital remote. You can change modes, fan speeds, and set points, and the app sends those commands via infrared.

On the other hand, Cielo and Mysa offer smart thermostats that operate just like a traditional thermostat to show system state and let you set schedules. You can do this on the device or through the app - or through your smart home technology. Speaking of which…

Automation Capabilities

One thing that Sensibo does well is connecting all the different elements of smart homes. It’s compatible with Google Home, Amazon Alexa, and Apple HomeKit. Cielo also works with ecosystems like Amazon Alexa, Google Assistant, Siri, and Samsung SmartThing.

We plan on taking automation a step further, though. We’re future-proofing our devices with Matter certification, which will allow Mysa to connect directly to Apple HomeKit, Amazon Alexa, and Google Home for instant voice control and seamless automation.

Another important distinction between Mysa vs Cielo vs Sensibo is that our devices let you automate, but won’t develop “minds of their own.” Temperature changes happen when and how the user sets them. 

Reporting Processes

This is a major difference between Sensibo vs Cielo vs Mysa - the level of data you gain access to. More specifically, how accurate energy usage insights are.

Cielo and Sensibo provide usage insights based on system activity and automation behavior. They do not measure electrical energy use. Mysa’s line-voltage thermostats measure actual electrical usage at the heater for better clarity.

Compatibility With Different Heating/Cooling Systems

Sensibo is fairly narrow in terms of the healing and cooling systems it supports. It works with any AC or heat pump that uses a remote, including mini-splits and window units. But that leaves a huge gap.

Similarly, Cielo supports similar IR-controlled systems and also offers one wired option for 24V HVAC. That’s a bit better, but again, anyone who wants to control electric baseboards or in-floor heating will be left out.

We make solutions for those who often get overlooked. Mysa covers electric baseboards, electric in-floor heating, ducted 24V HVAC, and mini-splits through separate, system-specific products. There’s something for everyone!

Bringing Our Cielo vs Sensibo Comparison to a Close

We hope you feel more confident in which is right for you between Sensibo vs Cielo vs Mysa after reading through this comparison guide. It just comes down to how much control and clarity you want over your heating and cooling.

Our blog has more comparison guides, such as Honeywell vs Nest, if you’d like to learn more. Or, explore the top Ecobee alternatives of the year. 

Otherwise, all that’s left to do is find out if Mysa is the right fit for controlling the climate in your home or business. Browse our compatibility charts or connect with our customer support team today for one-on-one support.