Can I control multiple baseboard heaters with a single Mysa thermostat?

Yes, as long as you stay within the power limits. You can wire multiple heaters in parallel to one Mysa thermostat (e.g., two baseboards on opposite walls of the same living room). Check Your Wattage: The total power of all heaters combined must not exceed 3,800 Watts (at 240V) or 1,900 Watts (at 120V).Check Your Space: The electrical box (gang box) must be large enough to accommodate the extra wires and wire nuts needed to join the heaters together. If the box is too crowded ("box fill"), it can be dangerous. Heaters are often daisy-chained to reduce crowding in the thermostat box.

Can I use Mysa with GFCI breakers?

It depends on the product. Mysa for Baseboard is generally compatible with GFCI breakers. However, Mysa for In-Floor includes its own built-in GFCI protection and should not be installed on a circuit that is already protected by a GFCI breaker to avoid nuisance tripping.

Do baseboard heaters need a special thermostat?

Yes. Baseboard heaters use high-voltage (line voltage 120V-240V) power, so they need a thermostat made specifically to handle that electrical load directly. Regular low-voltage smart thermostats (like those used for furnaces or central HVAC) aren’t compatible and can be dangerous if connected to these systems. That’s exactly why Mysa’s electric baseboard heater thermostat was created. It’s purpose-built for high-voltage electric baseboard, fan-forced in-wall, and in-ceiling heating systems. You can finally enjoy smart-home control, scheduling, and energy savings with the electric heating setup you already have!

Do baseboard heaters use a lot of electricity?

They can, especially if they’re left running continuously. Electric baseboard heaters are 100% efficient at converting electricity into heat, but they can still be expensive to run if not managed properly. Factors like room insulation, window quality, and using a smart thermostat to minimize run time all influence monthly energy consumption.

Do I need an electrician to replace a thermostat?

Not always. It depends on your comfort level and local regulations. Many customers can install the smart thermostat for electric baseboard heaters in about 15 minutes using step-by-step guides. However high-voltage wiring requires strict safety guidelines. Always turn off the circuit breaker before starting. If you’re not confident, the wiring looks different than expected, or local regulations require it, you should hire a licensed electrician.

Do smart thermostats work with baseboard heaters?

Most smart thermostats aren’t designed for electric baseboard heaters - they only work with low-voltage systems like furnaces or central HVAC. But Mysa for baseboard is different. It’s built specifically for high-voltage electric heating including baseboard, fan-forced in-wall, and radiant ceiling systems.

Do thermostats go bad on electric baseboard heaters?

They can, especially older mechanical thermostats. Internal bimetal strips can degrade over time, leading to temperature swings, while dust buildup or loose wire connections can cause unresponsive controls or safety hazards. It might be time to upgrade to an electric baseboard heater thermostat if you notice any of these signs, and your search ends here at Mysa. Not only does this solve your problems, but it gives you precise digital temperature control from anywhere!

Does Mysa support single-pole and double-pole wiring?

Mysa for Baseboard can replace most single-pole and double-pole thermostats, but it functions internally as a single-pole device. It requires a connection to both power wires (L1 and L2/Neutral) but only switches the power to the heater on one of those wires (the load wire).

How do I install Mysa for Baseboard?

For safety, first turn off power at the circuit breaker. Then, follow the step-by-step wiring instructions in the Mysa app. Once installed, restore power at the breaker and complete the pairing process in the app.

How do I know if my baseboard heater thermostat is bad?

They can fail. Here are some signs your baseboard heater thermostat might be failing: Your heater doesn’t respond when you adjust the temperature on the thermostat. Your room feels too hot or too cold, indicating calibration drift. You hear clicking, but your heater doesn’t heat up; this could indicate a burnt-out heater element. The faceplate of your old mechanical thermostat feels too hot to the touch. (Smart thermostats like Mysa may feel slightly warm during normal operation — this is normal.) It might be time to upgrade to our smart thermostat for electric baseboard heaters. You’ll love being able to control the heat in every room from anywhere, and our precise calibration ensures reliable, comfortable performance.

How to adjust a baseboard heater thermostat?

With a traditional dial thermostat, you must manually turn the knob until the room feels comfortable, which is often inaccurate and leads to overheating. Mysa’s smart thermostat allows you to fine‑tune the temperature digitally from the wall or your phone, set your ideal comfort level, and create weekly schedules or make quick adjustments via the app whether at home, work, or away.

I only see two wires in my gang box. Can I still install Mysa?

Mysa requires more than two wires to function. Unlike old mechanical thermostats that work like a simple light switch, Mysa is a smart device that needs continuous power to stay connected. The Requirement You typically need four wires in your electrical box: Supply (from the breaker) and Load (going to the heater). The Problem If you only have two wires, it is a "switch loop" and Mysa will not work without rewiring. We recommend you hire a licensed electrician or contact support with a photo of your current thermostat wiring

Is a neutral wire required?

Yes. Mysa for Baseboard requires a connection to both live wires in the electrical box (L1 and L2/Neutral) to power themselves; they cannot operate on a single conductor (two-wire) setups. However, always ensure you count the wires in the junction box, not the wires coming from the existing thermostat. Many homes have an extra wire tucked into the wall. Mysa data shows less than 10% of installations only have two wires in the junction box

Is it cheaper to leave baseboard heaters on all the time?

No. It is a common misconception that it is cheaper to leave baseboard heaters running constantly. It is more cost‑effective to heat only when and where you need it. Baseboard heaters allow zonal heating, so leaving them running in empty rooms wastes energy. Mysa’s smart thermostat can help you save up to 20% on heating costs by enabling zoned control, smart schedules, and geolocation features.

What temperature should baseboard heat be set at?

It’s entirely up to you and your comfort level. Most homeowners using Mysa keep baseboard heaters around 68–72°F (20–22°C) when they’re home, and lower the temperature to 60–65°F (16–18°C) while sleeping or away. Mysa’s electric baseboard thermostat lets you create custom heating schedules and uses geolocation to automatically adjust the heat based on your lifestyle, maximizing comfort and energy savings.

Smart Thermostat for Short-Cycle Convectors

Quiet, efficient short-cycle convector heat—now with Mysa scheduling, app control, and energy insights for line-voltage systems.

No products found

Effortless Smart Comfort. Year-round.

Forget "learning" algorithms that take weeks to guess your routine. Mysa gives you total schedule autonomy from day one, so you're only heating your home when you need to.

With Geofencing, Mysa senses when you leave the house and automatically lower the temperature, and turning it back up when you come back. It’s security for your home and your wallet, without the complexity.

Why heat the whole house just to warm one room? Mysa allows you to control each baseboard heater independently or group multiple creating "comfort zones" tailored to your home.

With Mysa for Baseboard V2 or In-Floor, you can see exactly where every cent of your heating bill is going. Our real-time energy insights empowers you to make smart adjustments that lead to real savings. Monthly usage report email feature is available to all Mysa thermostats.

Forever Free

One App. Total Autonomy.

Whether you’re on the couch or across the country, the Mysa app gives you a clear, minimalist interface to adjust your home’s climate. No more checking room-to-room; just simple, instant control that respects your time.

Take the guesswork out of efficiency. Use the app to build one or multiple custom schedules that match your real life, or enable Geofencing to let your home automatically drop into Away mode the moment you leave. It’s intelligence that works for you, not the other way around.

Knowledge is power. For Baseboard V2 and In-floor, track every cent with real-time energy usage data. For Central HVAC and Mini-Split systems, dive into detailed runtime reports to see exactly how your system is performing. Data that helps you make smart decisions.

Your home is a collection of spaces, not just one temperature. Group your thermostats into Zones within the app to manage entire floors or several rooms with a single tap. Invite family members or tenants to share control, ensuring everyone stays cozy.

Your home should look out for those who can’t look out for themselves. Receive instant smart alerts if the temperature or humidity drifts outside the comfort zone in the nursery, or ensure your pets stay perfectly cozy while you’re at the office. It’s more than a notification; it’s the quiet confidence of knowing your family is safe and comfortable, no matter where you are.